Traffix & Construction Management (TCM) Request a proposal
06 / Traffic simulation and 3D video

Traffic simulation and 3D traffic video: VISSIM, VISUM and Synchro

We build calibrated VISSIM, VISUM and Synchro traffic simulation models for schemes in Saudi Arabia and Qatar, then turn the results into 3D video drawn from the approved design. Microsimulation models every vehicle, so it shows the queues, weaving and blocking back a capacity spreadsheet misses.

Traffic simulation and 3D traffic video: VISSIM, VISUM and Synchro - TCM project photograph
TCM / IN THE FIELDSAUDI ARABIA & QATAR
SoftwarePTV VISSIM, PTV VISUM, Synchro, 3D animation
Typical usesClosures, interchanges, shutdowns, stakeholder approval
DeliverablesCalibrated model, validation report, MP4 video
Turnaround2 to 4 weeks, model and video
When you need it

When a model earns its cost

01

Reviewer request

RCRC, the Amanah, MOT and Ashghal reviewers ask for microsimulation where junctions interact, queues block back or weaving decides the outcome.

02

Closures on busy corridors

Major closures and diversions on arterials and expressways need evidence that the detour network copes in the peak.

03

Shutdowns and events

Short, intense peaks such as refinery turnarounds, gate changes and events are best tested before the day.

04

Board and stakeholder approval

Owners, boards and communities approve faster when they see the scheme in 3D rather than in LOS tables.

What you receive

Models the reviewer can audit, video anyone can follow

  • Base model built from counts, signal timings and site observation
  • Calibration and validation report against observed flows and journey times (GEH statistic)
  • Scenario results: delay, queue length, travel time and LOS for each option
  • Model files in VISSIM, VISUM or Synchro for the reviewer
  • 3D video in MP4 at 1080p, with stills for reports and presentations
  • Visualisation of TMP/TDP compliance: taper lengths, sign spacing and detour geometry
3D render of a proposed interchange with traffic under the flyover
3D visualisation of a TMP layout with signs, tapers and distances
Diversion visualisation

See a closure before it is built

We turn the approved diversion plan into a 3D animation. Traffic runs through each phase of the closure, with tapers, barriers and signs placed exactly as drawn.

  • Reviewers check sign spacing, taper lengths and detour geometry on screen
  • Site crews brief from the same view before the first cone goes down
  • Owners and the public see what changes on their route, and when
How we deliver

From data to a board-ready video

  1. 01

    Scope

    Network, scenarios, outputs and calibration targets agreed.

  2. 02

    Data

    Counts, signal timings, geometry and journey times.

  3. 03

    Calibrate

    Model matched to observed conditions.

  4. 04

    Test

    Each scenario run with multiple seeds and compared.

  5. 05

    Visualise

    Chosen scenarios animated from the model and drawings.

  6. 06

    Present

    Video, stills, short report and meeting support.

2 to 4 weeksCalibrated VISSIM model and 3D video
1 to 2 weeksSynchro signal or corridor analysis
1 week3D animation of an approved TDP
Good questions. Clear answers.

Simulation questions

Something else? Speak with an engineer.

WhatsApp Riyadh
Should we use VISSIM or Synchro?

Synchro suits signal timing and capacity on isolated junctions and corridors. VISSIM is needed where junctions interact, queues block back or lane changing decides the result. Many studies use both.

How do you calibrate a microsimulation model?

We compare modelled and observed flows using the GEH statistic and check journey times and queue lengths against surveys, adjusting driver behaviour and routing until the targets agreed with the reviewer are met.

Can you animate our approved TDP?

Yes. We build the animation from the approved drawings, so tapers, buffer zones, signs and detours appear where the plan puts them.

How long does a 3D video take?

About one week to animate an approved TDP. A calibrated VISSIM model with 3D video takes 2 to 4 weeks, depending on network size and data.

Will the authority accept the model files?

Yes. We deliver native VISSIM, VISUM or Synchro files with the calibration report, so the reviewer can audit the model.

What format is the video?

MP4 at 1080p, with stills. We can add English and Arabic captions for board and community presentations.

Start a conversation

Need the board to see it?

Send the site location and your programme. We come back with scope, price and earliest start, within one working day.

One engineer.
One accountable contact.

Request a proposal

Fields marked * are required.

0 / 2,000

Your request is submitted securely. An engineer will reply within one working day.

Request a proposal
Riyadh · Doha

Choose your local team

RiyadhSaudi Arabia+966 50 306 4427DohaQatar+974 7043 1546